You opened the attic and found vermiculite, animal contamination, and old fiberglass that needs to be removed before new insulation goes in. SealedScope makes sure every removal, air seal, and material upgrade is signed before you start blowing.

Start Free. No Card Required.See How It Works

Insulation crew installing spray foam in walls

Every insulation crew has been burned by this

🏠

Attic has old vermiculite that may contain asbestos, or animal nesting that needs professional removal. You can't blow over contaminated material.

🧱

Walls have no vapor barrier, and existing insulation is compressed, wet, or missing entirely. Proper install requires removal and air sealing first.

📐

Client upgrades from blown fiberglass to closed-cell spray foam mid-project. Completely different equipment, prep, and pricing per board foot.

Change orders insulation crews deal with on every job

Old Insulation Removal

$1,500 - $6,000

Vermiculite, wet fiberglass, or animal-contaminated material needs professional removal and disposal before new insulation can be installed. Bag-and-vac operations take a full day.

Air Sealing & Vapor Barrier

$800 - $3,000

Gaps around penetrations, missing vapor barrier, and unsealed rim joists. Proper air sealing is critical for insulation performance and often overlooked in initial bids.

Material Upgrades

$2,000 - $10,000

Switching from blown fiberglass to spray foam or adding rigid board to the exterior. Different R-values, different install process, significantly higher cost per square foot.

Additional Areas

$1,000 - $5,000

Client adds the garage, crawl space, or bonus room to the scope after seeing how well the first area turned out. Each area has unique access challenges and prep requirements.

Electrical & Plumbing Conflicts

$400 - $1,800

Recessed lights need IC-rated covers, junction boxes need access panels, and plumbing in exterior walls needs heat protection before insulation can be installed around them.

Ventilation Corrections

$600 - $2,500

Attic baffles are missing or crushed, soffit vents are blocked, and ridge vents aren't functioning. Proper ventilation must be restored before adding insulation or you create moisture problems.

Lock down every extra before you start blowing

Document the Change

Contaminated material? Missing vapor barrier? Open SealedScope in the attic, describe the issue, set the new price, and snap a photo of what you found.

Get It Signed

Send the change order via text or email. The homeowner sees the scope, the cost, and the photos. They sign digitally before you unload the machine.

Insulate with Confidence

Every removal, air seal, and material upgrade is documented and signed. The final invoice matches what was agreed to. No disputes at closeout.

From discovery to signed in minutes

Insulation Change Order Flow

Discover Issue

Contamination, missing barrier, or upgrade

Document On-Site

Photo + scope + price in SealedScope

Send to Client

Text or email with one tap

Client Signs

Digital signature in seconds

Start Install

Blow or spray with full authorization

Discover Issue

Contamination, missing barrier, or upgrade

Document On-Site

Photo + scope + price in SealedScope

Send to Client

Text or email with one tap

Client Signs

Digital signature in seconds

Start Install

Blow or spray with full authorization

The numbers don't lie

66%

of insulation jobs require old material removal or air sealing work not included in the original bid

$7,200

average annual loss per insulation contractor from undocumented removal and upgrade extras

3 min

average time to create, send, and get a change order signed with SealedScope

Stop losing money on insulation change orders

Join insulation crews who use SealedScope to document every removal, air seal, and material upgrade before it becomes a dispute. Free to start. No credit card.

Get Started Free

Your first 3 change orders are free. No strings attached.